carbon fiber skateboard deck boundmotor.com 11

carbon fiber skateboard deck boundmotor.com 12 scaled 2000x2000 1

carbon fiber skateboard deck boundmotor.com 6

carbon fiber skateboard deck boundmotor.com 5

carbon fiber skateboard deck boundmotor.com 2

carbon fiber skateboard deck boundmotor size detail

Out of Stock

Carbon Fiber Skateboard Deck

$349.00

Showtime!

supports our Samsung 18650 12s3p(9ah).

Recommend getting the new carbon fiber deck kit for your DIY project(Support 12s4p 21700):
Land Cruiser

Out of stock

A design like no other

High Stiffness;
Rigidity;
High Tensile
Strength;
Light weight;
Corrosion Resistance;
Fatigue Resistance;

SPECS

Size:
- 101.8×24.3×3.3cm
- 40×9.6×1.3in
ESC section: 14*14.5*2.3cm;
Battery section:57*14.5*2.3cm
Support our 12s3p Samsung 30Q battery pack

WHAT'S IN THE BOX?

1 * Carbon fiber skateboard deck
1 * grip tape
1 * ESC Case
1 * Charging Port
Bolt sets

carbon fiber skateboard deck boundmotor.com 13

Meepo shuffle swap.

I bought this and swapped my meepo shuffle deck with this one. Took a couple of modifications but worked great.

Nothing but positive results!!

Nothing but good things. This board feels and rides like a a dream. Plenary of torque with Boundmotor direct drive motors. The vesc works great fully tune-able.

Good budget carbon deck

It was what I expected
If you want to fit 2 motors with 12 awg and sensors you will have to grind out the cable channel, I knew that I would going into this.
I also had to drill out the bolt holes because they were slightly too small, but that's no big deal as well
Looks slick
I am definitely a fan

Excellent board but needed some modification

The board is excellent quality, foam core with metal mounts for trucks and carbon fibre shell really nice matt finish. It required some modification, the groove for the motor cables is far too small for 6364 motor cables (12awg) but will fit 5055 motor cables as I had these fitted first. The rear of the deck over hangs too much for 6354 motors on DKP trucks so I needed to drill extra holes to rotate the motor mounts. Fits a 10s4p pack 18650 would possibly take 12s4p 18650 but would be tight if using a smart BMS. Overall happy with the board just the little modifications required to put half decent set-up on it. Don't expect to put a monster build on this just a nice street/AT set-up